| Radius | 5 miles | 10 miles | 20 miles | 30 miles | 50 miles |
|---|
| Location | Title | Company | Pay | Date |
|---|---|---|---|---|
|
|
||||
|
US NY Long Island, NY |
* Test Engineering Manager * Manufacturing Manager |
Design Specialists - Established 1980 | 7/30 | |
| Details: Job # 1  Test Engineering Manager - Job Description       SummaryResponsible for the conception, design, development and release of test systems. Manages DVT (Design Verification Testing) on new products. Responsible for training, educating and releasing new product designs to manufacturing. Tracks progress of Test engineering projects. Prepares or assists in the preparation of departmental budgets. Develops diagnostic software to be utilized by test technicians during ATP process. Provides training on effective troubleshooting methods for specific functionality. Responsibilities Ability to specify test programs required for software developers. Ability to lead projects. Analyze existing circuit designs. Determine test requirements, including necessary test equipment. Develop test methodology. Prepare test procedure outline and work with software programmers to implement Integrate and document procedures. Train and work with production personnel, assist in diagnosis and repair of failed items. Conduct DVT test protocol on new designs and new products. Familiar with present day SMT technology. Able to perform failure analysis and determine root cause of yield problems.  Job # 2 Manufacturing Manager - Electronics - Active Components - Job Description        Directs and coordinates all departmental operations, including test, assembly, final assembly, integration and rework to produce products of high quality and reliability at optimum cost, and in accordance with customer shipping schedules . Provides for optimum utilization of manpower, equipment, purchased material and facilities in accordance with cost, schedule, quality and customer requirements . Plans, organizes, and supervises the activities of technicians engaged in the testing and troubleshooting of RF/microwave components, subsystems and/or complex electronic systems . Prepares, implements and recommends changes to sequences, methods and aids in order to maximize labor and material costs for test procedures. Recommends use and purchase of test equipment . Leads the training effort and assists production personnel to ensure compliance with standards, test requirements and methods regarding the troubleshooting, alignment and testing of module and top assembly hardware. AAS degree in technical or engineering field required, Bachelor’s degree preferred. Minimum of ten (10) years related experience including prior hands on experience with assembly/test under a microscope, electro-mechanical assemblies, RF products and product test. Must have thorough background in RF/MW technology within a high-tech manufacturing environment. Must be familiar with working in AS9100 and ISO 9001 environment . | ||||
|
|
||||
|
US CT Danbury |
Director of Manufacturing |
7/30 | ||
| Details: ·       Develops strategic plans and prepares yearly spending and capital department budget ·       Prepares facilities spending and activities plan ·       Develops, with the materials manager, safety stock requirements and plan for effective flow of parts for production and final test ·       Supports new product development and release ·       Drives continuous quality improvement programs ·       Develops high quality organization including succession planning and outstanding hires Tactical·       Directs manufacturing efforts to ensure execution of the quarterly plans ·       Oversees facilities spending and work contracts and makes sure equipment and facilities are properly maintained and kept in operational status · | ||||
|
|
||||
|
US NY White Plains |
B2B Sales / Industrial, Manufacturing |
ASN B2B | $48,000 - $80,000/Year | 7/29 |
| Details: Business to Business Sales Rep / B2B Sales Rep / Outside Sales Rep / Account Executives We are currently seeking aggressive individuals with excellent communication skills to call on local and national firms based in the local area. If you are tenacious with a strong desire to succeed we would love to discuss our opportunites with you.   ***TO BE CONSIDERED FOR THESE POSITIONS, YOU MUST CALL TO SPEAK WITH A REPRESENTATIVE: 1(866)-929-0091 / Job ID #30*** As an Outside Sales Representative, you will be responsible for managing a given territory. Working with a defined sales quota, you will focus on selling value and innovative solutions to decision-makers within companies. You must be results oriented, self motivated and driven by both financial and career opportunities. There are extremely competitive compensation plans available.  Base Salaries are ranging anywhere from $48,000 to $80,000 per year with benefits.  Average bonus and commission adds an additional $10,000 to $20,000 per year. If you are interested in being an account executive, sales representative, account manager or have had an interest in sales please call today and speak with a representative.   PLEASE CALL 1(866)929-0091 / Job ID #30 TO SPEAK WITH ONE OF OUR REPRESENTATIVES TODAY. | ||||
|
|
||||
|
US CT Farmington |
MANUFACTURING - PRESSROOM SET-UP LEADER |
CONNECTICUT SPRING & STAMPING | 7/27 | |
| Details: MANUFACTURING - PRESSROOM SET-UP LEADERWe are looking for an experienced pressroom set-up leader on the 1st Shift.Candidate must have a minimum of 10 years experience in a manufacturing environment setting-up metal stamping presses, straighteners and decoilers. Blueprint interpretation skills with the ability to inspect complex stamped parts is required. Leadership experience is necessary with good communication & organizational skills. Knowledge of progressive dies, toolmaking and lean practices is a plus.Please apply to:CONNECTICUT SPRING & STAMPING48 Spring Lane Farmington, CT 06032E-mail:                                                                    Fax: 860-677-0762  EOE/AAP | ||||
|
|
||||
|
US CT Orange |
Manufacturing Spray Painter |
Randstad US | 7/26 | |
| Details: IMMEDIATE OPENING for a SPRAY PAINTER**************************************Job duties:prepping work : buffing & sand blastingspray paintingcleaning spray gunsmixing paintsWorking hours: 1st shiftJob requirements:5+ years exp spray painting in a manufacturing environmentability to perform silk screeningsmust be able to submit to both a criminal background check and drug screeningPlease email resume for consideration to:Randstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. | ||||
|
|
||||
|
US CT Hamden |
Warehouse-Manufacturing (All Shifts) |
Hamilton Connections | $10.00 - $13.00/Hour | 7/26 |
| Details: Hamilton Connections has been a leader in the staffing industry in Connecticut since 1986. Focusing on light industrial, skilled trade and professional staffing, the company has developed a reputation for unparalleled customer service and the vision needed to develop recruiting plans for some of the top manufacturers in Connecticut.We currently have multiple openings on all shifts (1st/2nd/3rd), in New Haven County and along the shoreline (East Haven-Westbrook) area of CT, for the following positions:* Warehouse Workers (Order Picking/Packing, and Stocking)* Shipping/Receiving and Inventory Clerks* Manufacturing-Production Workers (Machine Operators)* Assemblers/Solderers* Quality Control/Inspectors***** Please indicate which position you are interested in applying for ***** | ||||
|
|
||||
|
US NJ Wayne |
Manager, Manufacturing Operations |
Engineering Resource Group | $105,000 - $120,000/Year | 7/26 |
| Details: Responsible for day-to-day operations and long term planning of manufacturing facility of this growing biopharmaceutical company. Formulates and recommends manufacturing policies, procedures and programs. Responsibilities include: Ensures that the facility and operations meet all EPA, OSHA and company requirements. Interface with product and process development to develop, scale-up and manufacture bulk formulations including: equipment sterilization, formulation, filling, monitoring of process parameters during production, equipment cleaning, filter integrity testing and documentation. Generation, modification and update of all manufacturing SOPs. Supervises manufacturing operations while maintaining cGMP requirements, ensuring SOPs are followed and no cross contamination issues. Works with Quality Operations to ensure validation of all modifications, systems and equipment. Responsible for performing variances and technical investigations as required as well as implementing changes necessitated by the investigations. Responsible for implementing changes to validated systems using proper change control Assists director or upper management in the Coordination and the development and scale up of new processes. Provides technical support. Assist Site leadership in developing and implementing departmental capital and expense budgets. Issue maintenance work requests and purchase requisitions as required. Responsible for supervision of direct reporting employees including performance appraisals and development plans. Manages activities of two or more section of departments through subordinate supervisors who exercise full supervision in terms of methods and employees | ||||
|
|
||||
|
US CT Shelton |
Manufacturing Engineer CNC Programmer |
DiSanto Tecnology Inc. | 7/26 | |
| Details: Company Description:Di Santo Technology started in 1967 and is located in Shelton, Connecticut. We are a privately owned precision manufacturing company specializing as a contract manufacture for the Orthopedic, Spine and fracture markets . We are a registered ISO 9001: 2000, ISO 13485: 2003 company. Job Description:Candidate will be responsible for the development of the manufacturing process including designing, building and sourcing all cutting tools and fixturing. The candidate will be responsible generating the CNC programs for 3,4,5 axis CNC Milling machine and 2,4 axis CNC Lathes. The candidate will also be responsible for all new program prove outs and support for the manufacturing floor. | ||||
|
|
||||
|
US NY Old Bethpage |
Manufacturing Process Engineer |
Hitemco medical applications, inc. (himed) | 7/21 | |
| Details: Hitemco medical applications, inc. (himed) engineers biomaterials and coatings for medical, dental and pharmaceutical applications in our facility located in Old Bethpage, NY. Manufacturing Process Engineer  As a detail-oriented and experienced Manufacturing Process Engineer, you will be responsible for performing process/engineering activities in the manufacturing and process development areas, relating to process/equipment troubleshooting, production support and process optimization. Responsibilities: Manage process development, verification/validation activities for new and existing manufacturing processes Perform IQ/OQ/PQ for new and existing manufacturing processes Analyze test data and generate reports in assessing process performance Generate process specifications, SOPs and preventive maintenance procedures Design manufacturing tools/fixtures, procuring those tools/fixtures and loading those tools/fixtures into document control Provide training as related to project/improvement initiatives Identify opportunities for process improvement and implement action plans Provide troubleshooting efforts for production processes and equipment issues Assist in the development and maintenance of process equipment, procedures, batch records and training materials Provide technical assistance as required within manufacturing or process development activities | ||||
|
|
||||
|
US NY Brooklyn |
Manufacturing / CNC Manager |
Huxley Associates | $25.00 - $30.00/Hour | 7/21 |
| Details: Manufacturing Engineer / CNC / Machine Shop Manager required for a brand new vacancy in Brooklyn. A well established, family owned machine shop specialising in OEM machine parts (prototype through to production) for a variety of industries, but with a focus on aerospace, are looking for a manufacturing / CNC specialist who is looking for the next step in their career. Besides the technical requirements: CNC programming experience on lathes (preferably up to 5 axis), precision machining, a thorough understanding of mechanical manufacturing processes; I am specifically looking for someone who either has management experience or has the ability to step up into a leadership position. Initial management responsibility of 4/5 engineers but this is expected to double over the next 2 years with the planned investment of up to $2 million into new product lines.This is a growth position, and an exciting time to join this organisation. They have recently completed their AS9100 certification, and have made no lay-offs through the economic downturn in recent times so they represent a really strong prospect for your future career. | ||||
|
|
||||
|
US NJ Northvale |
Production Supervisor - Boiler Manufacturing |
AERCO International | 7/20 | |
| Details: AERCO International, Inc. (AERCO) is a leading innovative supplier of boilers and water heating products, and the originator of semi-instantaneous water heating. When AERCO was founded in 1949, it introduced a revolutionary design for an indirect-fired water heater that heated water on demand, and without storage, at a controlled temperature. In 1988, AERCO again shook the industry as the first U.S. manufacturer to offer a fully modulating and condensing commercial gas-fired water heater and promptly extended this design to the hydronic boiler marketplace. AERCO pursues these practices with just one goal in mind: to satisfy our customers and provide them with the highest quality product and service. Come join our team as we continue our heritage of innovation into the future. SUMMARYIn coordination with the Plant Manager and other Production Supervisor, the Production Supervisor is responsible for the supervision of all personnel and production on the shop floor. He/She implements Lean principles in their area; provides support and oversees the work performed by the Group Leaders; and maintains the physical plant within the assigned area.ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Responsible for the implementation of Lean principles in their area to include elements of takt-time, balanced flow process, visual factory, empowered team meetings, total safety, standardize work and world class 5S standards.2. Supervises all work performed in entire their are; offering coaching/mentoring or corrective action when appropriate.3. Develop and empower team members in the application of Lean tools to include Andon light facilitation, process mapping, spaghetti charting, and the identification and elimination of the 7 wastes. 4. Lead the effort in safety compliance, improvement and promoting awareness in accordance with company safety requirements and guidelines; drive 5S into the production line on a daily basis.5. Coordinates “Pull" schedules and shop activities on a daily basis; promote flow and response to daily customer demand; establish Kanban Supermarkets where needed.6. Establish Kanban “point of use" inventory in coordination with Buyer/Planners.7. Reviews daily visual production boards to maintain efficient production performance; provides prioritized production scheduling to all Team Leaders and team members.8. Respond to line down issues and provide leadership to root cause analysis and corrective action plan execution; promotes Andon Light system.9. Provides technical assistance to the Team Leaders and team members. 10. Ensures equipment is maintained in accordance with Company guidelines. 11. Conducts performance review for team members in the shop.12. Conducts regularly scheduled Team Leader meetings.13. Conduct a minimum of one significant Kaizan event per quarter.14. Review and updates ECO’s. 15. Approves weekly attendance records on E-Time for team members.16. Ensures quality standards are met will all products. 17. Administers AERCO policies and procedures. 18. Additional projects as necessary.  SUPERVISORY RESPONSIBILITIES 1. Direct the supervision of the Team Leaders and team members.2. Perform Team Member Feedback appraisals on a timely basis.3. Lead team to work in a safe manner at all times and comply with safety policies and standards. | ||||
|
|
||||
|
US CT New Haven |
Lean Six Sigma Manager Manufacturing |
Apple & Associates | $95,000 - $122,000/Year | 7/20 |
| Details: Lean Six Sigma ManagerOur top client, industry leader within the medical manufacturing industry, has an exciting opening supporting a 1,800-person, non-union manufacturing operation with 4 manufacturing sites and some back offices as a Lean-Six Sigma Manager. Exceptional Performance will lead to progressive career advances within an organization that has a well-funded and top-down supported Lean Six Sigma program.The Lean Six Sigma Manager will lead and deploy Operational Excellence best practices throughout the manufacturing organization by supporting continuous improvement initiatives, improving manufacturing and business processes, and reducing costs. Provide training, expertise, mentoring and direction for improvement activities to support the manufacturing goals and objectives of the Company.Leading, facilitating, executing and managing projects to deliver significant cost savings by deploying Lean, Six Sigma and SPC tools and methodologies. Partner with management business leaders and process owners to develop a portfolio of continuous improvement projects that are aligned with business unit goals and objectives. Serve as a Lean/Six Sigma technical content expert to build process improvement knowledge within the organization. Identify and recommend manufacturing process improvements by applying continuous improvement principles. Train and mentor teams to drive improvement initiatives across the organization. | ||||
|
|
||||
|
US NY Bayport |
Manufacturing Assistant Manager 3pm - 11:30pm |
NBTY, Inc. | 7/20 | |
| Details: Category:  Manufacturing & Production Location:  NBNY0010 - NBTY - BAYPORT 10 NBTY is a leading vertical integrated U.S. manufacturer and distributor of a broad line of high-quality, value-priced nutritional supplements in the United States and throughout the world. The Company markets more than 1,200 products under several brand names, including Nature’s Bounty®, Vitamin World®, Sundown®, CarbSolutions™, MET-Rx®, Puritan’s Pride®, Holland & Barrett®, Nutrition Headquarters®, American Health® and Home Health®.SUMMARYUnder the direction of the Director/Manager, the Manufacturing Assistant Manager is responsible for monitoring productivity and motivating associates.  Also, responsible for adhering to the Standard Operating Procedures (SOPs) and Good Manufacturing Practices (cGMPs) that are in effect assuring the quality and quantity of product produced.Responsibilities: Identifies issues effecting efficiencies and assists in developing solutions Monitor productivity and motivate associates in production Ensure that all paperwork is properly documented Keep accurate attendance records; file proper reports (accident, probation, etc…) Supervise, counsel and coach associates on a regular basis Complies with company policies and procedures and maintains regular work attendance Personal responsibility for following safety rules, SOPs and cGMPs guidelines Performs other duties as assigned | ||||
|
|
||||
|
US CT Danbury |
Senior Manufacturing Engineer, Req 6667 |
Goodrich Corporation | 7/16 | |
| Details: Goodrich Corporation, a Fortune 500 company, is a global supplier of systems and services to the aerospace, defense and homeland security markets. With more than $6 billion in annual revenues, Goodrich has one of the broadest portfolios of products in the aerospace industry. The company serves a global customer base, with over 24,000 employees across approximately 90 manufacturing and service facilities in 16 countries worldwide. For more information, visit http://www.goodrich.com Manufacturing Engineer to work with our Electronic and Mechanical Engineers to design, develop and aid in the manufacture Electro-mechanical assemblies and systems. While this position will be dealing primarily with mechanical and electronic assemblies, almost all of the work that is done at this facility contains optics. Familiarity with handling optics would be desirable.Should be able to generate a workflow which accurately defines tasks and estimated times to completion. Experienced in writing a detailed set of instructions (Manufacturing Operation Sheet) which detail the assembly process for our hardware and has the ability to design tooling to support these tasks.Experienced with building "flight" hardware. Should be familiar with the following functions.Working with and building hardware in a clean room.Handling equipment that is static sensitive.Aware of MIL Specs, ISO requirements and DFMA.Continuous ImprovementFamiliar with NASA or J-Standard soldering techniques. Solder certification is not required but would be a plus.Familiarity with the Pro/E design tool. Must be able to read and work with engineer generated Pro/E drawings. Being able to produce Pro/E drawings would be a plus but will train as required.Should be familiar with working with a number of different materials such as graphite epoxy, beryllium, titanium, various aluminums and steels. Should also be familiar with various adhesive and epoxies.Must be a good communicator both verbally and in writing. Must be able to work with both internal and external customers. | ||||
|
|
||||
|
US CT North Haven |
Warehouse/ Manufacturing |
Monroe Staffing Services | $10.00 - $11.00/Hour | 7/16 |
| Details: Looking for strong warehouse/ manufacturing candidates.Ideal candidate will have at least 2-3 years warehouse/ manufacturing experienceForklift/ order picker/ packer/ not afraid of heights/ assembly | ||||
|
|
||||
|
US NJ Newark |
Team Leader- Manufacturing |
Masco | $12.00 - $18.00/Hour | 7/16 |
| Details: Arrow Fasteners is currently looking for qualified team leaders to join its manufacturing operations. The ideal candidate will possess a solid understanding of manufacturing processes, ability to effectively communicate in both English and Spanish, excellent problem solving skills and a can do attitude. Excellent opportunity with a established and stable organization. | ||||
|
|
||||
|
US NY Westchester |
Manufacturing - Sourcing Manager |
CONFIDENTIAL | 7/15 | |
| Details: MANUFACTURINGSOURCING MANAGERManufacturer of sports apparel and related hard goods items seeks a Sourcing Manager to oversee their east and west coast offices, overseas factories and quality control department.Candidate will direct the daily operations, communicate with off shore factories and offices, assure that critical dates are met and a balanced plan is in place and adhered to. He/she will negotiate final prices and terms with suppliers, source and establish appropriate sample making facility.Ideally the position requires someone with a minimum of 10 years experience with existing resources in team sports apparel and some hard goods, long term relationships with socially responsible factories and cross cultural management. Ability and history of overseas travel a must. Proficiency in Excel and Microsoft Office is essential.Please send resume and cover letter with salary requirements to:Hwith SM in the subject line. | ||||
|
|
||||
|
US CT Branford |
Manufacturing Engineer - Contract |
Harco Laboratories | 7/15 | |
| Details: Join the team of Harco Laboratories, Inc., the premier manufacturer of aerospace and ground base products. We are a privately owned company that has been in business for over 58years. Our product lines include thermocouples, harnesses, leads, electrical cables, sensors, and more! Recently named "Top 25 Best Companies to Work for in Connecticut" by the Hartford Business Journal. We are an equal opportunity employer!Harco is currently seeking a Contract Manufacturing Engineer to join the Project Management team. This assignment will run through January, 2011. Qualified Candidates should submit their resume to: Please Reference: Mfg Eng in the subject line. Essential Duties and Responsibilities:  Must posses understanding of processes such as welding, brazing, casting, machining swaging potting, soldering, thermocouple assemblies  Must posses understanding of manufacturing and development processes such as inspection, assembly, acceptance testing, qualification testing, failure analysis.  Reverse engineering of components for DER Repair and PMA projects, including dimension measuring, material identification, process identification, distractive and non-distractive tests, organized documentation, summary and recommendation report  Capable of Developing, evaluating, and improving manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards  Responsible for the development of engineering masters/manufacturing instructions using manufacturing engineering practices, specific to electrical cable, thermocouples or electronic assembly manufacturing.  Prepare quotations for labor, tooling and equipment as part of development and production readiness  Participate in concurrent engineering design reviews.  Evaluate and approve drawings, routings, Manufacturing Instructions, specs and other documents.  Design and procure tools/equipment.  Write appropriation requests.  Train manufacturing personnel or conduct training to introduce new processes.  Prepare/manufacture prototypes as required utilizing the principals of concurrent engineering. | ||||
|
|
||||
|
US CT Durham |
Manufacturing Engineer |
Graphite Diemold | $55,000 - $65,000/Year | 7/14 |
| Details: Morgan AM&T (Advanced Materials and Technology) is a wholly-owned subsidiary of the Morgan Crucible Company PLC, a global advanced materials technology company based in Windsor, United Kingdom. Morgan AM&T, part of the Carbon Division, manufactures a range of engineered products from carbon, graphite, silicon carbide and other advanced materials in locations around the world.  At  our location in Durham, CT, Graphite Die Mold, we produce high precision, ultra pure graphite products for a wide variety of applications including the semi conductor and solar industries. Local Candidates Only Programming Engineer Responsibilities Include  Develop and implement new methods of programming/manufacturing to improve and reduce cost Make new programs/setup sheets as required Update routings/masters as required Investigate/evaluate time standards for jobs Modify existing programs/setup sheets as required Investigate/evaluate quality issues and resolve Purchase/design tooling as required Support/work with Supervisors and operators to resolve technical issues Support/work with QC when there are issues with inspection Match Blue prints to customer orders Design and program fixtures for shop Design special cutting tools as required Quoting and determine proper techniques for manufacturing all machined components | ||||
|
|
||||
|
US CT Stamford |
Scientific Manufacturing Process Technician-Stamford, CT |
Kelly Engineering Resources | 7/13 | |
| Details: Process Operator - Scientific - Manufacturing Process Tech II 2 positions - temp for 4-6 months Provides lab and other support as needed to the manufacturing team of molecular biologists and production biologists. For Example: in handling laboratory maintenance, maintenance of labequipment and supplies. All members of the manufacturing team are responsible for coordinating and executing in a timely fashion, all activities necessary to maintain compliance with GMP and ISO 13485 and the integrity of the Quality Mgmt system. Description of duties prepare cleaning solutions place samples in storage areas maintain suppliers and reagents operate basic lab equipment tend distilled water ports assist/maintaing instrument verification and calibration perform or verify daily, weekly, and monthly cleaning procedures maintain laboratory and laboratory stock perform general lab audits preform equipment maintenance formulation of subassembly solutions and small reagent bulks transportation, handling and disposal of chemicals and human serum perform operation/calibration of all general lab equipment perform refrigerator/freezer maintenance vial labeling *Bachelors Degree and 1+ year experience. Understanding of laboratory equipment and working knowledge of GLP. Knowledge of GMP, quality programs a plus. non- technical skills Ability to maintain a clean and orderly laboratory environment ability to communciate effectively strong organizational skills ability to prioritize tasks attention to detail and concern for impact is essential | ||||
|
|
||||
|
US NY Farmingdale |
MANUFACTURING POSITIONS Planner / Machinists |
Precipart Corporation | 7/9 | |
| Details: Precipart Corporation is a leading manufacturer of gears and other motion control solutions. We are a large precision machine shop, and due to recent growth, we have an immediate opening for the following positions:PLANNER: Hands-on individual to coordinate & expedite production ops. Must read blue prints. MACHINISTS: Min. 5 yrs. exp. in CNC Lathe or Gear Cutting for all shifts. Modern A/C plant, competitive pay & benefits plus a profit share plan. | ||||
|
|
||||
|
US NY Long Island Queens |
MANUFACTURING MECHANIC - FOOD MANUFACTURING |
Love and Quiches Desserts | 7/9 | |
| Details: Frozen Dessert Manufacturing Company is looking for an experienced maintenance mechanic that will repair and maintain all production equipment and plant facilities.The candidate must be skilled with inspection, installation, replacement, adjustments, alignments, testing and diagnostics of HVAC systems, hydraulics, pneumatics, plumbing, electrical systems, mechanical components, electronic controls, gears and motors, welding, carpentry, painting, machining and fabrication. Needs to read and interpret schematics, specifications and manuals, troubleshoot with various tools and instruments, and be computer proficient, be familiar with tag-out/lock-out procedures, working in various environments including confined space and variable ambient temperatures, production line setups and changeovers, preventative maintenance and corrective actions. Have own tools is preferable and the ability to interface with vendors, supervisors and management is preferable. Bilingual in both English and Spanish is a plus. Applicants must have a minimum of a high school diploma or equivalent. Overtime may be required. A background check will be completed. | ||||
|
|
||||
|
US NJ Upper Saddle River |
Manufacturing Engineer/Project Manager |
Triangle Manufacturing Co., Inc. | 7/8 | |
| Details: Company Background - www.trianglemfg.com Triangle Manufacturing Company, Inc. has been a leader in contract manufacturing for over 50 years, working with many of the foremost medical and commercial OEMs in the world. Development expertise, precision machining to the tightest tolerances and meticulous finishing and assembly are our hallmarks. We have three state-of-the-art facilities dedicated to medical instruments and surgical implants. Our medical division engineers and manufactures a wide range of medical devices for the orthopedic, ENT, trauma, cranial, rehabilitation and sports medicine markets.Located in Upper Saddle River, NJ Triangle offers a clean, safe and progressive environment. We are registered to ISO 9001:2008 & ISO 13485:2003.Benefits include -Medical, dental, disability, and life insurance.401(k) with company match.Professional development and training. Tuition reimbursement. Paid time off.Company bonus plan.  Manufacturing Engineer - We are seeking a high-level Manufacturing Engineer/Project Manager to work in our Medical Device manufacturing division who will be responsible for the successful outcome of the development and implementation of the complete part-specific process. Manage all aspects of the process, including resource planning, project timelines and establishing priorities, to ensure customer requirements and quoted standards are met. Creates, updates and maintains the item masters, BOM and routers, etc. Reviews RFQs and helps determine feasibility of project, estimates labor and related costs and prepares formal quotes for submission. Teams with customer to review designs for manufacturability. Understands functinality of the part and its features, adds specifcations and verifies GD&T was properly applied. Develops manufacturing methods. Performs initial sourcing and qualifies suppliers from a technical perspective and effectively communicates customer's requirements. Develops and implements complete quality plans including CMM programming, gage design and procurement and inspection plans. Performs validation activities (IQ, OQ, PQ) if required. Participates in root cause analysis of customer/supplier rejections and internal failures. Determines impact of ECNs and coordinates any changes. Provides direction and training to other engineers and production associates. Champions lean manufacturing principles. | ||||
|
|
||||
|
US NY Long Island, New York |
Sales Support Representative - Electronics Manufacturing |
Design Specialists Established 1980 | 7/8 | |
| Details: SUMMARY: Under general supervision, provide support to the Sales Department in response to customer inquiries relating to products, price, and delivery.   ESSENTIAL DUTIES AND RESPONSIBILITIES: Answers customer and sales representative inquiries, by phone, mail, or fax. Provide price quotes and delivery information. Discuss customer needs, and recommend products that will best satisfy them.  Processes orders using computerized order entry system. Review paperwork to ensure accuracy and completeness i.e., addresses, model numbers, price, quantity, etc. Distribute paperwork as required.  Acknowledge order, prepares quotations from prevailing price lists, and advise customers of order substitutions and back orders.  Interface with production, engineering, accounting and quality assurance to expedite orders.  Set up and maintain bid files.  SALES SUPPORT REPRESENTATIVE  Processes customer inquiries, quoting standard prices, delivery information, and terms. Confers with Regional Sales Managers for accurate quotations.  May perform other clerical duties including record keeping, filing, switchboard relief, etc. as required. | ||||
|
|
||||
|
US NJ Elizabeth |
Manufacturing Equipment Technician |
System One | $75,000 - $82,000/Year | 7/7 |
| Details: Performs analytical troubleshooting of pharmaceutical manufacturing equipment, including mechanical / electrical systems and instrumentation and controls (I&C). Also provides technical expertise to purchase, install and test equipment and/or controls to improve or replace existing systems.SPECIFIC JOB RESPONSIBILITIESÂ Â Â 1. Analyzes and troubleshoots mechanical, electrical and electronic pharmaceuticalmanufacturing equipment.2. Interfaces with PLC / SCADA control systems to facilitate troubleshooting.3. Recommends system and process changes to improve overall efficiency of facilities /automation engineering department and manufacturing operations.4. Performs Control Loop Tuning and Optimization.5. Partners with maintenance to ensure understanding of technical issues and corrective actions to be taken while minimizing down production time. Performs minor repairs as needed.6. Implement small equipment / instrumentation upgrades and work with Equipment Qualification group to test system modifications.7. Coordinates and oversees spare parts inventory of Manufacturing and MRF facilities. | ||||
|
|
||||
|
US CT Hartford County |
Manufacturing-Process Engineer (Strong Aerospace Background) |
Merry Employment | 7/6 | |
| Details: POSITION SUMMARY: Aerospace manufacturer/supplier of precision machined aerospace components-ISO/AS9100 is seeking an aggressive, highly motivated Manufacturing Engineer to join their team.Responsible for the design/development of major rotating jet engine components, production tools, and developing solutions to production problems relating to materials, processes, and tooling. Supports programs by developing production controls, developing new processes, and designing tooling. | ||||
|
|
||||
|
US NJ Monmouth County |
Manager OEM Customer Marketing (Consumer Good/ Manufacturing) |
Michael Page International | 7/3 | |
| Details: About our clientSleep Innovations is a leader in the design and production of memory foam sleep products - with a special emphasis on pillows, mattress toppers, and mattresses. In addition, Sleep Innovations creates memory foam accessories - for dorm rooms, bedrooms, leisure and travel.Job descriptionThe Manager of OEM Customer Marketing is the primary support person for the Business to Business division of Sleep Innovations. This role is designed to serve as the key liaison between the OEM sales force and all relevant cross-functional HQ departments to include product development, marketing, operations and manufacturing. Interactions with other key departments in clued finance and the retail sales division. This role will contribute to and drive the new product development process, sales and channel strategy and eCommerce efforts.Qualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or Experience:4 year degree or equivalent prefWhat's on offer80-120K base DOEGreat Benefits | ||||
|
|
||||
|
US NY New York |
Oracle 12i Functional Manufacturing- Consultant |
Accenture | 7/2 | |
| Details: Description Oracle 12i Functional Manufacturing- Consultant Organization: Technology Growth Platform Locations: Negotiable Travel: 100% (Monday - Friday) Technology Growth Platform (TGP) offers a full range of global delivery services-from enterprise solutions, system integration, technical architectures, business intelligence, infrastructure consulting, and technology research/development. Our TGP consultants can expect to: Work with cutting edge technology Deliver high-quality solutions across multiple industries Work on a variety of projects ranging in both size and scope Receive continuous training Gain rapid career progression  Accenture's Oracle practice is central to our overall business and strategic to our growth objectives in both consulting and outsourcing. With more than 3 decades of experience working with Oracle, we continue to be the market leader in providing high quality solutions and services to our clients. | ||||
|
|
||||
CenterportNewYork.com
HOTELS • REAL ESTATE • JOBS